Page 1
USER MANUAL V1.0 EcoFlow Smart Plug EcoFlow Inc. Plant A202, Founder Technology Industrial Park, Shiyan Sub- district, Bao’an District Shenzhen, Guangdong 518000 China...
Page 2
Once you use this product, it is deemed that you understand, approve and accept all the terms and content in this document. EcoFlow is not liable for any loss caused by the user's failure to use this product in compliance with this user manual.
Safety Instruction 1. Before using this product, please read and fully understand this document and all related documents of this product. Failure to properly operate this product could cause serious injury to yourself or others, or damage to this product and other property. 2. Please make sure the input rating of the device you connected does not exceed the rating of this device.
Page 4
Press once to turn it on. The indicator Plug in the smart plug. will turn green. Press and hold the button until the Complete pairing in the EcoFlow app. indicator blinks blue. The smart plug switch to the pairing mode.
Page 5
3. Scan the Matter code, a dedicated label, on the smart plug with the smart home app. Follow the instructions in the app to complete pairing. NOTICE For pairing, it is better to select the same Wi-Fi when using the EcoFlow app and Matter code. Smart home app...
Matter code. Factory Reset Press and hold the button for 10s to reset the smart plug . Page of your Smart Plug in the EcoFlow App NOTICE The figures are for reference only, please refer to the actual app interface.
Relay Function The smart plug has a relay function that sends a signal to another smart plug, thus enhancing the signal propagation. Each smart plug can only be relayed once. Specifications Operating temperature -10 °C to 40 °C (14 °F to 104 °F) Humidity 10 % to 90% RH (non-condensing) Altitude...
Need help?
Do you have a question about the EFA-SmartPlug-EU and is the answer not in the manual?
Questions and answers