Adjusting The Height Of The Door - LG GC-X247CKBV Owner's Manual

Adjusting the Height of the
Door
If the door of the appliance is not level, adjust
the difference in the height of appliance door
using the following method.
NOTE
• Because the hinge pin may fall out, do not
adjust the height of the appliance door more
than 5 cm.
[Method1]
*Reference
Spanner
1
Loosen the keeper nut by rotating it
counterclockwise using a 19 mm spanner.
To loosen the nut
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise
with an 8 mm spanner.
Up
Down
3
After adjusting the difference in the height
of the appliance door, fasten the keeper nut
by rotating it clockwise.
To tighten the nut
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
[Method2]
1
2
Keeper nut
Adjustment hinge pin
3
• When tilting the appliance backward to loosen
the screw at the bottom of the appliance, two
or more people should hold the handles at the
bottom and rear top side of the appliance.
When the appliance door is removed,
loosen the screw at the bottom of the lower
hinge.
Insert the appropriate number of ring sheets
between the lower hinge and the lower
bracket. (Total number of ring sheets: 4)
Lower Lower
hinge bracket
Ring sheet
Resecure the bracket screw after fitting the
ring sheets before refitting the door. When
the door is refitted, steps 1,2 and 3 of
adjusting the height of the door can then be
repeated.
CAUTION
EN
17