Sony MEX-BT2750 Installation page 2

1


1 2
1 8 2
m m
5 3 m
m
Claws

Precautions Mounting the unit in a Japanese
car
• Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
You may not be able to install this unit in some makes of
• Avoid installing the unit in areas subject to dust, dirt,
Japanese cars. In such a case, consult your Sony dealer.
excessive vibration, or high temperatures, such as in
Note
direct sunlight or near heater ducts.
To prevent malfunction, install only with the supplied screws .
• Use only the supplied mounting hardware for a safe
and secure installation.
How to detach and attach the
Mounting angle adjustment
front panel
Adjust the mounting angle to less than 45°.
Before installing the unit, detach the front panel.
Removing the protection collar
and the bracket
-A To detach
Before detaching the front panel, be sure to press .
Press , and pull it off towards you.
Before installing the unit, remove the protection
collar  and the bracket  from the unit.
1 -B To attach
Remove the protection collar .
Pinch both edges of the protection collar , then
Engage part  of the front panel with part  of the unit,
pull it out.
as illustrated, and push the left side into position until it
2
Remove the bracket .
clicks.
 Insert both release keys  together between
the unit and the bracket  until they click.
Warning if your car's ignition
 Pull down the bracket 
, then pull up the unit
to separate.
has no ACC position
Mounting example
Be sure to set the Auto Off function. For details, see the
supplied Operating Instructions.
The unit will shut off completely and automatically in
Installation in the dashboard the set time after the unit is turned off, which prevents
battery drain.
Notes
If you do not set the Auto Off function, press and hold
• Bend these claws outward for a tight fit, if necessary (-2).
• Make sure that the 4 catches on the protection collar  are  until the display disappears each time you turn
properly engaged in the slots of the unit (-3).
the ignition off.
RESET button
When the installation and connections are completed, be
sure to press the RESET button with a ballpoint pen, etc.,
after detaching the front panel.
2

Face the hook inwards.


3
Dashboard


A
TOYOTA

max. size
5 × 8 mm

Bracket
Fire wall

A

B
NISSAN

max. size
5 × 8 mm
to dashboard/centre console

max. size
5 × 8 mm
Bracket
Existing parts supplied with your car
B
to dashboard/centre console

Bracket
max. size
5 × 8 mm
Bracket
Existing parts supplied with your car