Wallplate HDBaseT Transmitter for HDMI and VGA
AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
The Atlona AT-HDVS-200-TX-WP is a 2×1 switcher and HDBaseT transmitter with an HDMI input
plus a VGA input with audio. The HDVS-200-TX-WP features a US two-gang, wallplate form
factor. Video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded
audio, control, and Ethernet can be transmitted up to 330 feet (100 meters). The two-channel
audio input can be assigned to either video input and embedded for HDBaseT transmission.
The HDVS-200-TX-WP is designed for use with the AT-OME-RX21 4K scaling receiver, but can
also be used with Atlona switchers and matrix switchers with HDBaseT inputs. This transmitter
can serve as an integral component of a fully automated AV system, with the convenience of
automatic input selection and display control. It is remotely powered by the OME-RX21 or other
Atlona devices over HDBaseT.
The Atlona AT-HDVS-200-TX-WP-BLK is identical to the AT-HDVS-200-TX-WP, except for the
addition of interchangeable black and white wallplates and faceplates.
Package Contents
AT-HDVS-200-TX-WP
1 x AT-HDVS-200-TX-WP
1 x Captive screw connector, 3-pin
1 x Faceplate, w/ LAN port exposed
1 x Installation Guide
IMPORTANT: Visit https://www.atlona.com/product/AT-HDVS-200-TX-WP or
https://www.atlona.com/product/AT-HDVS-200-TX-WP for the latest firmware updates
and Installation Guide.
AT-HDVS-200-TX-WP / AT-HDVS-200-TX-WP-BLK
AT-HDVS-200-TX-WP-BLK
1 x AT-HDVS-200-TX-WP-BLK
1 x Captive screw connector, 3-pin
1 x Black faceplate, w/ LAN port exposed
1 x Installation Guide
1
Installation Guide