Page 1
Car Refrigerator Instruction Manual CFL-18/CFL-25 SKU: Email:support@euhomy.com Facebook:@Euhomy.Official...
Page 3
Email: support@euhomy.com Facebook: Euhomy.Official The Euhomy team is available 24/7 to address your questions, comments, and concerns. Your satisfaction is our ultimate goal. We want to make everything right so you'll share your positive experience with other shoppers on Amazon.
Product Function Introduction High-quality DC variable-frequency compressor and drive module make for a high-efficiency, energy-saving, stable, and reliable mobile refrigeration system. Microcomputer intelligent control system with accurate temperature control is easy to use. Compatible with a variety of power inputs. Intelligent recognition of DC 12/24V voltage adapts to different settings as needed: car, marine, home, or outdoor use.
Product Safety Do not touch an exposed power cord with your hands. Do not let water touch the power inlet or control panel. This may cause short circuit or danger. When using this product during the travel, please make sure that the power supply lines and fuses have enough carrying current.
Precautions For Use When using the refrigerator, please place it in a well-ventilated area that is conducive to heat dissipation. In particular, the gap between the cooling vent on the compressor side and other objects must be greater than 3.93inch, so as to prevent heat buildup from causing failure or impairing the refrigeration effect.
Brief Operating Instructions 1. Refrigerator opening and closing: Connect the correct DC 12/24V power supply. If the refrigerator is in standby mode, press and hold the power button for 2 seconds to complete the startup. After startup, the display will normally display information such as the current temperature and working mode of the compressor.
Brief Operating Instructions Note: If your refrigerator enters Battery Protection mode too quickly, it is likely that your power supply voltage is insufficient and the low-voltage protection value is set too high. Or your DC power supply wiring is not suitable and cannot provide enough current. Check whether the power supply wiring is suitable and consider appropriately lowering the battery-protection setting.
Error Code Descriptions When the compressor, module, fan, and temperature sensor are abnormal and the input voltage is too low, an error code will appear on the display and the compressor will stop working. Once the abnormality is eliminated, unplug the power supply and plug it in again to return to the temperature displayed.
Frequently Asked Questions SOLUTION PROBLEM Check that the power is on. Check the voltage. It may be too low. Why isn’t my refrigerator Check all connections from battery to refrigerator for working? looseness or poor contact. Check the fuse. Check that the refrigerator is turned on. Too much food may have been put in the refrigerator.
Technical Parameters CFL-18 CFL-25 Input voltage DC12V/24V, AC110–240V Temp control range -4℉ to 68℉ Refrigerant R134a Insulation material C5H10 (cyclopentane) Rated power 45W±20% Rated current 3.75A/1.875A Net weight 22.1LBS 23.2LBS Dimensions 22.4*13.0*10.3IN 22.4*13.0*13.1IN Standard Packing List Car refrigerator DC cigarette lighter power cord...
Need help?
Do you have a question about the CFL-18 and is the answer not in the manual?
Questions and answers