Mercedes-Benz E-Class Saloon 2022 Operator's Manual page 375

%
When the mobile device is not connected, the
programme is displayed in a neutral colour
and no feedback can be given on the impact.
▌Calling up the ENERGIZING COACH display
Requirements:
The fitness tracker is connected with your Gar-
R
min account
Your Garmin account is connected with your
R
Mercedes me user account in the Mercedes
me ENERGIZING app.
The mobile phone is connected to the multi-
R
media system ( page 414).
/
You are logged in with your Mercedes me pro-
R
file both in the vehicle and in the Mercedes
me ENERGIZING app.
Multimedia system:
© Apps ENERGIZING COACH
4 5 5
Your current pulse as well as an evaluation of
#
your pulse for the last 30 minutes driving time
are shown.
A corresponding fault message is shown if
there is no mobile phone connected or no
pulse can be sent to the system for an exten-
ded period.
%
Only pulse values in the range of 30 ‑ 140
(possibly 150) bpm are shown on the central
display. The pulse values have no medical val-
idity but are only informative in nature and are
therefore also not required to be accurate.
▌Calling up ENERGIZING Biofeedback
Requirements:
The vehicle is switched on.
R
Multimedia system:
© Apps
4 5
ENERGIZING Biofeedback
5
Starting and stopping ENERGIZING Biofeedback
Operate ; to start the program.
#
A video is played giving a calming breathing
frequency with opening and closing circles,
supported by an audio with wave sounds.
%
The circles are only shown when the vehicle is
stationary, or only to the front passenger
when the vehicle is moving, so as not to
endanger the driver's attention.
MBUX multimedia system 373
Select É to stop the program.
#
Connecting a new device
Select Z.
#
Select Device selection.
#
The desired device can be chosen from the list
of connected mobile devices.
Selecting a program
Select Program settings.
#
Switch the supporting functions from ENER-
#
GIZING COMFORT via massage, ambient light-
ing and suggested programs on or off.
Setting the duration of the program
Select Program settings.
#
Under Duration of programme
#
duration. You can choose between three, five
or seven minutes.
set the desired