Table of Contents
Advertisement
366 MBUX multimedia system
Measurement can be stopped early by interrupt-
ing the acceleration manoeuvre.
Quarter mile race
Select Z
Drag race
options.
#
Select Quarter-mile.
#
Set a target distance.
#
Measurement stops as soon as the specified
target distance has been reached.
Start off and begin the measurement.
#
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been covered.
Measurement can be stopped early by interrupt-
ing the acceleration manoeuvre.
Measuring braking
Z
Drag Race options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Start off and begin the measurement.
#
Brake to a stop.
#
Measurement is carried out in increments of
10 km/h to a stop. If the braking manoeuvre
is started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached
Storing and calling up measured values
If measurement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved.
Confirm the prompt with
OK
#
Calling up saved measurements
± Select History.
#
Select Acceleration,
Quarter-mile
#
Select a measurement.
#
The desired measurement is displayed in
detail.
or
Delete a measurement.
#
Calling up the telemetry display
Multimedia system:
TRACK PACE
4
The telemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
Engine speed
R
to save.
Wheel angle
R
Speed
R
Steering angle
R
or Braking.
Set the parameters.
#
Set the time.
#
The set parameters are evaluated in the dia-
gram for the selected time.
Configuring AMG TRACK PACE
Requirements
To connect a mobile device to the TRACK PACE
app:
Telemetry
5
Advertisement
Table of Contents
