Samsung RZ38 Series User Servicing Manual page 7

OneDoor_RR9000C_User-servicing-manual_26langs.indb 7
2. Remove CAP HINGE
3. Remove 2 fixed SCREWs for the HINGE
4. Take out HINGE.
NOTE
Due to the auto close function, a unit of
HINGE folds quickly and securely owing to
the activity of the spring. Avoid getting your
fingers stuck inside the multi-joint HINGE.
CAUTION
• After removing the DOOR, disassemble the
HINGE.
- The remaining HINGE may become
overloaded if you disassemble one of
the Top or Bottom HINGES while the
DOOR is still attached.
• The identical procedure is used if the
DOORS open in the opposite way.
• The same disassembly method is applied
to the Top/Bottom HINGEs.
• To assemble, just reverse the same steps
for the disassembly.
English
2022-09-16 2:29:48