Using This Appliance - Hamilton Beach HealthyCook HB4006 Instruction Manual

USING THIS APPLIANCE

Starting Your Appliance
1. When you plug in the appliance to the mains, all the icons will flash up briefly with an audible signal
before the appliance will go into standby mode with just the POWER key illuminated.
2. Press the POWER key and the L, R and L=R will light up. These can be selected to set up the
cooking process.
3. If you press the L=R (Sync) icon, the icon will begin flashing and the six pre-set food icons will be
illuminated. The same will happen if you press either L or R.
Icon Operation
1. To Set The Timer:
a. Press the "+" and "-" arrow buttons above and below the timer icon to adjust the cooking time
up and down. The timer goes up in one minute intervals.
2. To Set The Temperature:
a. Press the "+" and "-" arrow buttons above and below the temperature icon to adjust the
cooking temperature up and down. The temp goes up in 5
and min. temperature setting, the up and down icons will be not be illuminated.
3.To Set The PreHeat Function:
a. Press the pre-heat icon, default setting 200
L icon, and the left drawer will be pre-heated. Press R, and the right drawer will be pre-heated. If you
press L=R, both drawers will be pre-heated together. The max. pre-heat time is 60 min.
b. After the time and temperature has been set, press the "start/pause" icon, and the appliance will
begin working to the settings you have programmed. The programmed icons will stay illuminated
and others will switch off.
c. After programming the appliance, if you press the "POWER" icon, the unit will switch "OFF".
4.To Start and Pause Whilst Cooking:
a. When both drawers are working together, if you press the "start/pause" icon, the appliance
will chime once and then pause cooking. Press the"start/pause" icon again to start the cooking
process again.
b. If want to pause one of the drawers press L or R first, then press the "start/pause" icon.
c. When the appliance has been "paused" it won't start the cooking process again until the
"start/pause" icon has been pressed.
d. When the appliance is working, the timer and temperature can be adjusted again. Press L or R
and adjust the timer or temperature as needed.
e. When the appliance is working, if you press and hold the "POWER" icon, the unit will chime
once and switch "OFF".
f. When the appliance has finished cooking or has been paused, it will switch itself "OFF"
after 5 mins of inactivity.
g. When finished cooking, the appliance will chime 5 times and switch itself "OFF". The screen will
show the word "End" for 5 mins and the "POWER" icon will illuminate.
C intervals. When you reach the max.
o
C 5min (not suitable for Dehydrate function). Press the
o
7