Preparing For Use; Removing The Drawers; Turning The Appliance On/Off - Hamilton Beach HealthyCook HB4006 Instruction Manual

PREPARING FOR USE

1. Remove your appliance from the packaging.
2. Check that there is no damage to the cord or any visible damage to the body.
3. Check that all listed parts are present.
4. Remove any stickers or labels from the appliance. DO NOT remove the rating label
or any warnings.
5. Dispose of the packaging in a responsible manner.
6. Place the appliance on a stable, horizontal, even and heat-resistant surface in accordance
with the important safety information section.
7. Thoroughly hand wash the grill plates and drawers with hot water, some washing up liquid
and a non-abrasive sponge. Dry thoroughly with a tea towel.
8. Wipe the inside and outside of the appliance with a damp cloth.
9. DO NOT fill the drawer with oil, frying fat or any other frying liquid. This is an oil-free fryer
that works on hot air.
10.DO NOT put anything on top of the appliance, as this will disrupt the airflow and the
hot air frying will be affected as a result.

REMOVING THE DRAWERS:

The drawers can both be removed fully from the Air Fryer. Pull on the handle to slide the
drawer out of the Air fryer.
NOTE: If a drawer is removed from the main body of the fryer when in operation, the unit
will automatically stop the cooking process on that side. When the drawer is re-inserted, the
air fryer will resume operating on the settings it was programmed to last.

TURNING THE APPLIANCE ON/OFF

1. Plug the unit into a mains socket. The unit will emit an audible signal and the control panel
will illuminate briefly, before entering stand-by mode with just the POWER key illuminated.
2. Press the POWER key to turn the appliance on, this will illuminate the control panel.
3. Press and POWER key to stop further operation. The unit will emit an audible signal and
go into standby mode.
NOTE: If there is a power cut or the unit is unplugged during operation all indicator lights will go off.
Once connection is re-established the unit will continue to operate on the program previously set.
NOTE: To turn the unit off during operation, press and hold the POWER key. The unit will stop
heating and there will be an audible signal, the POWER icon will remain illuminated.
5