Appendix; Color Bar Output; About Copy-Protected Video; Troubleshooting - Edirol VMC-1 Owner's Manual

Video optimizer/media converter

Hide thumbs Also See for VMC-1:

Table of Contents

Appendix

The VMC-1 is able to output color bars from its analog output jack. To output color bars,

simultaneously press the DV input button and the analog input button. This is useful when

you need to adjust the image on another video device. To return to normal operation, press

either of these buttons once again.

* Turning the VMC-1's knobs will not affect the color bar image.

If copy-protected video is input to the VMC-1, an image with decreased brightness and

contrast will be output, and the frame synchronizer indicator will go out.

Power Does Not Turn On

Make sure that the included AC adaptor is correctly connected to the VMC-1's AC adaptor

jack and is plugged into an AC outlet.

Image and Audio Are Not Output

Make sure that the video cable and audio cable are correctly connected to the input jack and

output jack.

When Inputting Analog, Image Is Dark

If copy-protected video is input to the VMC-1, an image with decreased brightness and

contrast will be output.

When Inputting Analog, Sound Is Distorted

The audio input level is too high. Turn the audio input level knob so that the red indicator

does not light.

When Inputting DV, the Sub Audio Is Not Output

The audio mix mode is set to "main only." Turn ON DIP switch 5 on the bottom panel (p. 11)

to select the "50% main + 50% sub" setting.

Table of Contents