Bottom Panel (Dip Switches) - Edirol VMC-1 Owner's Manual

Bottom Panel (DIP Switches)

OFF ON
OFF ON
VMC-1 VMC-1
MODEL MODEL
1 Video Format NTSC PAL
2 NTSC Setup Level 0 IRE 7.5 IRE SER.NO. SER.NO.
3 Locked Audio Mode LOCKED UNKOCKED
4 Audio Format 48kHz / 16bit 32kHz / 12bit
5 Audio Mix Mode MAIN MAIN+SUB
6 Reserved
MADE IN JAPAN MADE IN JAPAN
1. Video format setting switch [Video Format]
Specifies the video signal format.
OFF NTSC
ON PAL
2. NTSC setup level setting switch [NTSC Setup Level]
Specifies the NTSC setup level.
OFF 0IRE
ON 7.5IRE
Select 0IRE in Japan, and select 7.5IRE in North America.
3. Locked Audio mode setting switch [Locked Audio Mode]
Specifies the Locked Audio mode for analog input.
OFF Locked
ON Unlocked
4. Audio format setting switch [Audio Format]
Specifies the audio sampling rate and bit depth when using analog input.
OFF 48kHz/16bit
ON 32kHz/12bit
5. Audio mix mode setting switch [Audio Mix Mode]
Specifies whether the sub-channels will be output when you input 32 kHz/12-bit 4-channel
audio format via DV.
OFF Main only
ON Mix 50% main + 50% sub
6. Audio muting time setting switch
Depending on the video editing software you're using, you may experience audio noise at the
beginning of playback if this switch is turned ON. In this case, use the OFF setting.
OFF Normal
ON Short
* When the VMC-1 is shipped from the factory, DIP switch 6 is turned OFF.
Make sure to turn off the power before you change the settings of the DIP switches on the
bottom panel.
Names of Things and What They Do
1
2
3
4
5
6
OFF ON
11