Document Revision History - Hitachi 650 Series Operation Manual

Hide thumbs Also See for 650 Series:

Technical manual (454 pages)

Quick start manual (48 pages)

Application manual (102 pages)

Table Of Contents

Table of Contents

Section 1

Introduction

project and insert IEDs to the project structure. The manual also recommends a sequence for the

engineering of protection and control functions, as well as communication engineering for IEC 61850.

The installation manual contains instructions on how to install the IED. The manual provides

procedures for mechanical and electrical installation. The chapters are organized in the chronological

order in which the IED should be installed.

The commissioning manual contains instructions on how to commission the IED. The manual can

also be used by system engineers and maintenance personnel for assistance during the testing

phase. The manual provides procedures for the checking of external circuitry and energizing the IED,

parameter setting and configuration as well as verifying settings by secondary injection. The manual

describes the process of testing an IED in a station which is not in service. The chapters are

organized in the chronological order in which the IED should be commissioned. The relevant

procedures may be followed also during the service and maintenance activities.

The operation manual contains instructions on how to operate the IED once it has been

commissioned. The manual provides instructions for the monitoring, controlling and setting of the

IED. The manual also describes how to identify disturbances and how to view calculated and

measured power grid data to determine the cause of a fault.

The application manual contains application descriptions and setting guidelines sorted per function.

The manual can be used to find out when and for what purpose a typical protection function can be

used. The manual can also provide assistance for calculating settings.

The technical manual contains operation principle descriptions, and lists function blocks, logic

diagrams, input and output signals, setting parameters and technical data, sorted per function. The

manual can be used as a technical reference during the engineering phase, installation and

commissioning phase, and during normal service.

The communication protocol manual describes the communication protocols supported by the IED.

The manual concentrates on the vendor-specific implementations.

The point list manual describes the outlook and properties of the data points specific to the IED. The

manual should be used in conjunction with the corresponding communication protocol manual.

The cyber security deployment guideline describes the process for handling cyber security when

communicating with the IED. Certification, Authorization with role based access control, and product

engineering for cyber security related events are described and sorted by function. The guideline can

be used as a technical reference during the engineering phase, installation and commissioning

phase, and during normal service.

1.3.2