Table of Contents
Advertisement
en Meals
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to the maximum microwave power
2.
setting for 30 seconds to 1 minute.
3.
Start the operation.
Check the cookware several times:
4.
– If the cookware is cold or warm to the touch, it is
suitable for microwave use.
– If the cookware becomes hot or sparks are cre-
ated, stop the cookware test. The cookware is
not microwave-safe.
7.4 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ Follow the safety instructions. → Page 4
¡ Observe the instructions on how to prevent material
damage. → Page 6
¡ Observe the information on microwave-safe cook-
ware and accessories.
Press "Microwave" in the menu.
1.
Or select the microwave directly using the touch
‒
field
.
Press the microwave output in watts.
2.
Use the setting ring to set the microwave output.
3.
To confirm the microwave output, press
4.
display
Press
"Cooking time".
5.
A cooking time must always be set to operate the
microwave.
To change the preset cooking time, press the relev-
6.
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
7.
If required, use
to reset the setting value.
To confirm the set cooking time, press
8.
play.
Press
to start the operation.
9.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "boost".
a When the time has elapsed, a signal tone sounds. A
notification appears on the display confirming that
the operation has finished.
Once the cooking time has elapsed:
10.
If required, you can select other settings and re-
‒
start the operation.
Meals
8 Meals
The "Meals" operating mode helps you to use your ap-
Meals
pliance to prepare different meals by selecting the op-
timum settings automatically.
8.1 Tips on configuring the settings for
dishes
Follow these tips to achieve optimal cooking results:
¡ Only use food that is in perfect condition.
10
‒
Dry the cooking compartment.
11.
Tip: To ensure optimum use of your appliance, refer to
the information in the recommended settings.
→ "How it works", Page 17
7.5 Changing the microwave output
You can change the microwave output setting during
operation.
Press
1.
Press the set microwave output setting.
2.
Use the setting ring to set the microwave output.
3.
Press
4.
7.6 Changing the cooking time
Press
1.
Press the set "Cooking time".
2.
To change the preset cooking time, press the relev-
3.
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
4.
If required, use
on the
5.
Press
7.7 Extending the cooking time
Once the cooking time has elapsed, you can continue
cooking the food.
Press "Add extra cooking time".
1.
Set the required cooking time.
2.
→ "Setting the cooking time", Page 12
You can reset the set cooking time using
3.
Press
Use
4.
on the dis-
7.8 Pausing the operation
Open the appliance door or press
1.
a Operation is paused.
To continue operation, close the appliance door and
2.
press
a Operation continues.
7.9 Cancelling the operation
Press
▶
a The appliance stops any ongoing functions.
¡ Take the food out of its packaging and weigh it. If
you cannot set the exact weight on the appliance,
round the weight up or down.
¡ Only use microwave-safe, heat-resistant cookware,
e.g. made of glass or ceramic.
¡ Place the food in the cold cooking compartment.
Defrosting
¡ Freeze and store food flat and in portion-sized
quantities at -18 °C.
When the food is ready, use
pliance off.
.
.
.
to reset the setting value.
.
.
to start the operation.
.
.
to switch the ap-
.
.
Advertisement
Table of Contents
