Panasonic ES-ALV6H Operating Instructions Manual page 18

Problem
Shaver does not
operate even after
charging.
The driving sound
changes while shaving.
18
Action
Use the appliance in an
ambient temperature
approximately 5 °C (41 °F)
or higher.
The battery has reached the
end of its life.
The shaver will not operate
with the AC adaptor
connected. Please use the
shaver after it has been
sufficiently charged and the
AC adaptor disconnected.
The shaving sensor is
operating. The sound
changes depending on the
beard thickness.
Problem
Makes a loud sound.
The odor is getting
stronger.
Shavings fly out in all
directions.
System outer foil gets
hot.
Action
Apply oil.
The blades will not move
smoothly when there is no
oil on the blades, requiring
more power.
The shaver makes a high‑
pitched sound due to the
linear motor drive. This does
not indicate a problem.
Confirm that the blades are
properly attached.
Wash the system outer foil
with water. (See page 14.)
Clean the shaver.
Clean the inner blades with
water when shavings are
adhering to the inner blades.
Apply oil.
Replace the system outer
foil if it is damaged or
deformed.
(See page 15.)