Engine Break-In - Yamaha GRIZZLY 350 2016 Installation Manual

reverse, make sure there are no people or ob-
stacles behind you. When it is safe to proceed,
go slowly.
1. Bring the ATV to a complete stop.
2. Apply the brake pedal.
3. Shift from neutral to reverse and vice versa by
moving the drive select lever along the shift
guide.
TIP
When in reverse, the reverse indicator light should
come on. If the indicator light does not come on,
have a Yamaha dealer check the electrical circuit.
1. Drive select lever
2. F (Forward)
3. N (Neutral)
4. R (Reverse)
4. Check behind for people or obstacles, and
then release the brake pedal.
5. Open the throttle lever gradually and continue
to watch to the rear while backing.
EBU20683

Engine break-in

TIP
 For ATVs equipped with an odometer or an hour
meter, follow the figures given in km (mi) or the
figures given in hours.
6-4
1
F 2
N 3
R 4
6