Olivetti PGL2645 Operation Manual page 256

Appendix > Optional Equipment
(9) Parallel Interface Kit (IB-32B)
The parallel interface kit supports communications speeds up to 2 Mbps. Use a parallel printer cable when this option is
used.
IB-32B User's Manual
(10) PT-320 "Rear Tray" (PG L2655 only)
Use the faceup output tray when you wish paper to be stacked with the printed side facing up (reverse order). The rear
tray can only be used for printing from a PC.
Installing the Rear Tray
(11) Wireless Network Interface Kit (IB-36)
This is a wireless LAN Interface card which supports the wireless LAN specifications IEEE802.11n (Max 65 Mbps) and
11 g/b. In addition, network printing is possible without using the wireless LAN router because Wi-Fi Direct is supported.
(12) PF-3100 Bulk Paper Feeder
Holds approximately 2,000 sheets of 76 to 216 mm × 148 to 305 mm size paper. This bulk paper feeder can be attached
to the front of the printer after the MP tray has been removed.
(13) UG-33 "ThinPrint Option"
This application allows print data to be printed directly without a print driver.
(14) USB Keyboard "USB Keyboard"
A USB keyboard can be used to enter information into the text fields on the operation panel. A special mount is also
available to install the keyboard on the machine. Please contact your dealer or service representative for information on
keyboards that are compatible with your machine before you purchase one.
1
Install the paper stopper according to the size of paper to be used.
2
Install the rear tray on the rear of the machine.
11-6