Advertisement
All manuals and user guides at all-guides.com
NT
Follow these instructions for NT systems.
Physically replace the disk.
Note The procedure is detailed below in the Disk Replacement Procedure section, as well as on the Disk
Replacement Sheet provided with the replacement drive.
Step 1
After installing the disk module, execute the Disk Administrator utility to
configure the new disk module.
Step 2
To execute select Start -> Programs -> Administrative Tools -> Disk
Administrator.
Step 3
The new drive detection wizard will detect the new devices and will write a
signature to each device. Choose yes at the prompts questioning these actions.
Step 4
From the list of drives, choose the first unconfigured drive by right clicking
on the free space. Choose create to create a new volume, then choose to use the entire available disk
space.
Step 5
Then right-click on the unformatted volumes and select commit changes now
and press OK to the update emergency repair disk notice.
Step 6
Right-click once again and choose format. Select to format using NTFS and give the volume a name.
Choose quick format and press OK to continue.
Step 7
Once formatted, repeat the process for each of the remaining drives.
At this point, the system should be fully functioning.
Procedure Completed!
Congratulations!
8
Advertisement
