Roland MV-8000 Frequently Asked Questions page 4

Q14. I want to set the tempo to the audio phrase.
Ans.
1. Press [AUDIO PHRASE] and then strike the pad if you want to set an audio phrase tempo.
2. Press [F5 (Edit)].
3. Set the range of the start point and end point of an audio phrase.
4. Set length (phrase) from Start Point to End Point on BPM Base Note Parameters. Set how many notes on
which type of note.
If this is set, the tempo of audio phrase will be calculated automatically. Result of calculation will be shown on right
upper part of screen as [Audio Phrase BPM: ].
Q15. How can I playback Audio Phrase and Sequence in tempo sync.
Ans.
Use Audio Phrase that has tempo information. You can change duration of such audio phrase and enables you to do
playback in tempo sync.
1.
Operate "Ans. of the Q14" all.
2.
Turn the BPM Sync parameter On.
With above setting, duration of audio phrase automatically extends or shrinks without alternation of pitch according to
the tempo of the sequence.
4
Q&A
40565123 '03-12-3KS