Anti-Crease - Beko WUX81282WI/IT User Manual

To enable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds. While you're holding the button
pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.Then, "Con" will be displayed
to warn the user that child lock is enabled.If you press any button or turn the Programme Selection
knob while the Child Lock is enabled, the same warning will be displayed.
To disable Child Lock:
Press and hold the Auxiliary Function button 2 for 3 seconds while the programme is running. While
you're holding the button pressed for 3 seconds, C03, C02 and C01 will be displayed respectively.
Then, "COF" will be displayed to warn the user that child lock is disabled.
C
INFORMATION
• In addition to the method above, to deactivate the Child Lock, switch the Programme Selection
knob to On/Off position when no programme is running, and select another programme.
• Child Lock will not be disabled after a power failure or unplugging.
AntiCrease+
•
If you press and hold the auxiliary function button 3 for 3 seconds, this function will be selected
and the programme follow-up light of the relevant programme will turn on. When this function
is selected, the drum will rotate for up to eight hours to ensure that the clothes do not crease at
the end of the programme. At any time during these eight hours, you can cancel the programme
and unload the machine. Just press any button or turn the programme selection knob to end the
function. The programme follow-up light will remain on even if you end the function by pressing any
button. If you end the function by turning the programme selection knob, the programme follow-up
light will remain on or go off depending on the selected programme. If you do not cancel the function
by pressing the Auxiliary Function button 3 for 3 seconds, it will be used in the next washing cycles
as well.
4.3.11 End Time Adjustment
The End Time Adjustment function allows you to set the end time of the programme up to 19 hours.
You can increase this time by 1-hour intervals.
C
INFORMATION
• Please do not use liquid detergent if you have selected the End Time Adjustment function.
Stains might remain on the clothes.
1. Open the loading door, place the laundry and add detergent, etc.
2. Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3. Press the End Time Adjustment button and select the desired time.
4. Press the Start/Pause button. The delayed end time you have set will be displayed. Countdown will
start for delayed end. On the display, "_" will move up and down next to the delayed end time.
C
INFORMATION
• If the programme has not started, you can add laundry into the machine during the delayed end
time.
5. At the end of the countdown, duration of the selected programme will be displayed. "_" will
disappear and the selected programme will start.
Changing the delayed end time
If you want to change the time during countdown: Turn the programme selection knob to cancel the
delayed end time function, and then set the desired time again.
1. Press the End Time Adjustment button. When pressed for the first time, the programme duration
will be rounded up to the closest whole number time. Each following press will increase the time by
an hour.
2. If you want to decrease the delayed end time, press the End Time Adjustment button consecutively
until the desired time is displayed.
58 / EN
Washing Machine / User's Manual