Table of Contents
Advertisement
4.3.7.2 Functions/Programs selected by pressing the key for 3"
• Drum Cleaning
Press and hold the 1st auxiliary function key for 3 seconds to select the programme.
Use regularly (once in every 1-2 months) to clean the drum and provide the required hygiene. Operate the
programme while the machine is completely empty. To obtain better results, put powder lime-scale remover
for washing machines into the detergent compartment no. "2". When the programme is over, leave the loading
door ajar so that the inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance programme.
Do not run the programme when there is something in the machine. If you try to do so, the machine detects that there is
load inside and aborts the programme.
• Child Lock
Use Child Lock function to prevent children from tampering with the product. Thus you can avoid any changes
in a running programme.
C
You can switch on and off the product with On / Off button when the Child Lock is active. When you switch on the product
again, programme will resume from where it has stopped.
To activate the Child Lock:
Press and hold 2nd auxiliary function button for 3 seconds. In the programme selection display on the
panel, „CL 3-2-1 On" light will turn on. When this light is on you can stop pressing on 2nd when this warning
is displayed.
To deactivate the Child Lock:
Press and hold 2nd Auxiliary Function button for 3 seconds. In the programme selection display on the
panel, „CL 3-2-1 Off" light will turn on.
• Anticrease+
This function is selected when the 3rd auxiliary function is pressed and held for 3 seconds and the
programme follow-up light for the relevant step turns on. When the function is selected, the drum rotates
for up to 8 hours for preventing the laundry from creasing at the end of the programme. You can cancel the
programme and take your laundry out at any time during the 8-hour duration. Press the function selection
key or the machine on/off key to cancel the function. The programme follow-up light will remain on until the
function is canceled or the step is complete. If the function is not cancelled, it will be active in the subsequent
washing cycles as well.
4.3.8 End Time
With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing
End Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time
indicator is illuminated.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
4 Press Start / Pause button. Time countdown starts. ":" symbol in the middle of the end time on the display
starts flashing.
21 / EN
Washing Machine / User's Manual
Advertisement
Table of Contents
