Westfalia FORCE-200G Original Instructions Manual page 11

Blackout table
The welding helmet has the blackout level 11. Look in the table, use the
blackout level 11 as a guide and read off the arc current that is suitable for your
desired welding process.
Welding
Processren
Abbreviation
SMAW
MAG
TIG
MIG (heavy)
MIG (light)
PAC
PAW
Operation of the Flip-Up Visor(5)
Fold the flip-up (5) up and down on both side wings. Always keep the flap
closed when welding. Otherwise there is a risk of injury to your eyes
Replacing the viewing panes
Make sure that all panes are always clean. Replace the lenses immediately if
they are cracked or scratched.
Attention:
▪ Only clean the welding helmet with a slightly damp cloth. Do not use any
aggressive cleaning substances.
▪ Do not immerse the welding helmet in liquids.
▪ Clean the headband at regular intervals.
▪ Store the welding helmet in a dark place protected from dust, dirt and
moisture. Do not expose the welding helmet to direct sunlight.
Arc Current (Ampere)
Designation
Welding with coated electrodes
Metal active gas welding
Tungsten inert gas welding
Metal inert gas welding of heavy metals
Metal inert gaswelding of light alloys
Plasma cutting
Plasma welding
11