Contents Introduction................1 Safety Notes................1 Lens Parts ..................2 Lens Control ................3 Flange Back Adjustment ...............4 . Preparation ................4 . Flange Back Adjustment ............4 PL Mount Assembly Instruction .............8 EF Mount Assembly Instruction.............9 Specification................10 A er-sales Service ..............11 The Name and Content of Hazardous Substances ......13 Note Click to go Users can read the table of content(TOC) to have an overview of the...
Pictor series is a set of high-performance S zoom lenses produced by DZOFILM. Good representation of details, vivid colors and smooth transition of image as well as can be characterized in this series of lenses. They are suitable for different kinds of projects, documentary, MV, commercials, films, live broadcast etc, bringing...
Back to Contents Lens Parts Front cap Zoom Ring Lens Mark Aperture Ring Focusing Ring Rear Cap Holes for Zoom Lever Socket * Holes for Supporting Base* (M , mm deep) (M / - thread, mm deep) Zoom Lever Socket Mounting holes * (M , mm deep)
Back to Contents Lens Control Focus Control Rotate the focus ring to increase or decrease the focus distance. Focusing Ring Zoom Control Rotate the zoom ring to zoom out, increasing the area visible in the frame or zoom in on the subject so that it fills a larger area in the frame. Zoom Ring Aperture Control Rotate the aperture ring to stop aperture down, raising the T-stop and narrowing the...
Ready your subject. You can use a "Star Chart", or other high-resolution black-and-white objects; Note : You can download and print the chart on DZOFILM website-Support-Download ( Click to jump to the website) Center-Tool-Star Chart For Adjusting Back Flange Step Two : A ach the lens to the camera;...
Page 7
Back to Contents Maximum aperture Φ Set the object . m away from the camera sensor plane, and adjust it to the center of the whole image. Take Pictor Zoom mm as an example: mm, and focus till the image is at its sharpest, the Rotate the focal length to focusing distance mark is .
Page 8
Back to Contents mm shim adjustment reference mm focusing mm focusing Shim adjustment ( mm) mark S (m) mark S(m) mm shim adjustment reference mm focusing mm focusing Shim adjustment ( mm) mark S (m) mark S(m)...
Page 9
Back to Contents mm shim adjustment reference mm focusing mm focusing Shim adjustment ( mm) mark S (m) mark S(m) 0.65 +0.25 +0.2 0.75 +0.14 +0.12 0.85 +0.09 +0.07 0.95 +0.04 +0.02 -0.02 -0.04 -0.06 -0.08 -0.11 -0.14 -0.16 -0.18 -0.2 -0.22 -0.24...
Back to Contents PL Mount Assembly Instruction Align the slot on PL mount to the pin on the rear of lens. Then lay the PL mount flat on the lens rear and slightly rotate the mount. If the mount cannot move, that means the mount sits in right place.
Back to Contents EF Mount Assembly Instruction Align the slot on EF mount to the pin on the rear of lens. Then lay the PL mount flat on the lens rear and slightly rotate the mount. If the mount cannot move, that means the mount sits in right place.
Back to Contents Specification Name Pictor Colour Black/White Focal Length 20-55mm 12-25mm 50-125mm 14-30mm Mount PL/EF Aperture T2.8-22 Image Circle ∮31.5mm(S35) Construction 21 Elements 18 Elements 18 Elements 21 Elements in 15 Groups in 15 Groups in 13 Groups in 17 Groups of Optics Flange Distance 52mm (PL)...
DZOFILM for information specific to your location. Warranty Service DZOFILM grants a minimum warranty period of one year from the date of purchase for lenses purchased through DZOFILM’s official dealers. DZOFILM warrants that each DZOFILM product that you purchase will be free from material and workmanship defects under normal use in accordance with DZOFILM’s user manual and accompanying documenta-...
Page 14
× Damage caused by operation in bad weather or environment (i.e. rain, sand/dust storms, humid environment, etc.). × Damage caused by, any third party products, including those that DZOFILM may provide or integrate into the DZOFILM product at your request. × Damage caused by any third-party product.
Back to Contents The Name and Content of Hazardous Substances Hazardous Substances Part Name Cr(VI) PBDE Lens Shell Inner Mechanics Optics Other Parts This table is formulated in accordance of SJ/T ○: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the GB/T standard.