Contents Introduction................1 Safety Notes................1 Lens Parts ..................2 Lens Control ................3 Flange Back Adjustment ...............4 . Preparation ................4 . Flange Back Adjustment ............4 PL Mount Assembly Instruction .............7 EF Mount Assembly Instruction.............8 Specification................9 A er-sales Service ..............10 The Name and Content of Hazardous Substances ......11...
Pictor series is a set of high-performance S zoom lenses produced by DZOFILM. Good representation of details, vivid colors and smooth transition of image as well as can be characterized in this series of lenses. They are suitable for different kinds of projects, documentary, MV, commercials, films, live broadcast etc, bringing...
Lens Parts Front cap Zoom Ring Lens Mark Aperture Ring Focusing Ring Rear Cap Holes for Zoom Lever Socket * Holes for Supporting Base * (M , mm deep) (M , mm deep) Zoom Lever Socket...
Lens Control Focus Control Rotate the focus ring to increase or decrease the focus distance. Focusing Ring Zoom Control Rotate the zoom ring to zoom out, increasing the area visible in the frame or zoom in on the subject so that it fills a larger area in the frame. Zoom Ring Aperture Control Rotate the aperture ring to stop aperture down, raising the T-stop and narrowing the...
Ready your subject. You can use a "Star Chart", or other high-resolution black-and-white objects; Note : You can download and print the chart on DZOFILM website-Download-Star ( Click to jump to the website) Chart for Adjusting Back Flange Step Two : A ach the lens to the camera;...
Page 7
Maximum aperture Set the object . m away from the camera sensor plane, and Φ adjust it to the center of the whole image. Take Pictor Zoom mm as an example: Rotate the focal length to mm, and focus till the image is at its sharpest, the focusing distance mark is .
Page 8
mm shim adjustment reference mm focusing mm focusing Shim adjustment ( mm) mark S (m) mark S(m) mm shim adjustment reference mm focusing mm focusing Shim adjustment ( mm) mark S (m) mark S(m) 0.65 +0.25 +0.2 0.75 +0.14 +0.12 0.85 +0.09 +0.07...
PL Mount Assembly Instruction Align the slot on PL mount to the pin on the rear of lens. Then lay the PL mount flat on the lens rear and slightly rotate the mount. If the mount cannot move, that means the mount sits in right place.
EF Mount Assembly Instruction Align the slot on EF mount to the pin on the rear of lens. Then lay the PL mount flat on the lens rear and slightly rotate the mount. If the mount cannot move, that means the mount sits in right place.
To prevent waste, repairs or replacement may be made using refurbished parts or products, and DZOFILM may collect returned parts or products for later use. When returning a product for repair, please let us know if you need the original parts.
The Name and Content of Hazardous Substances Hazardous Substances Part Name Cr(VI) PBDE Lens Shell Inner Mechanics Optics Other Parts This table is formulated in accordance of SJ/T ○: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is below the relevant threshold of the GB/T standard.
Need help?
Do you have a question about the PICTOR Series and is the answer not in the manual?
Questions and answers