Before the use of the charger and the battery read the
instruction manual carefully.
During the charge process, the current used should
correspond to the current of the battery charger.
Never let moisture, rain or splashed water reaches the
charging location.
The ambient temperature must not exceed 40 °C.
Batteries which are defective or damaged or can no
longer be recharged must be disposed as a
hazardous waste. Hand them over at a special
collection point. Never harm our environment. Do not
throw unusable storage-battery packet away into the
domestic waste, into fire or into water.
If the supply cord of the charger is damaged, it must
be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Use only storage-battery packet, which have been
produced by the original manufacturer.
Always keep the surface of the charger free from dust
and dirt.
Insert the battery packet into the charger. Follow the
guidelines provided concerning polarity.
Always remove battery packet before working on the
machine
When the battery is outside the drill, cover the
contacts to avoid short circuits (e.g. from tools)
8