Special Safety Instructionn For Battery And Charger - Hyundai HSS18V-A Original Instructions Manual

 Do not attempt to cut items thicker than the maximum cutting depth of the blade, or where
there is insufficient space for the blade under the item.
 The saw's metal parts may become conductive if the saw comes into contact with a live wire.
Therefore only hold the saw by its insulated handle.
 Check that the ventilation slots are not blocked.
 Never remove dust, obstructions or the like from the work area while the blade is operating.
 Never stop the saw blade by applying pressure to the saw or to the side of the blade.
 Do not lift the saw from the item being cut if the blade is still running.
 Never place the saw on a table or workbench if it has not stopped completely.
 The saw blade will continue to run a short time after the machine has been switched off.
 Hold power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a
"live" wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock
3. Special safety instructions for battery and
charger
 If under extreme conditions any electrolyte should
escape from the battery, it's essential to avoid contact
with skin. If electrolyte does come into contact with
your skin, rinse it off with water. In the event of
electrolyte contact with your eyes, it's essential to
consult a doctor.
 This charger can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children
shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without
supervision.
7