Erasing Patterns (Pattern Clear) - Boss Dr. Rhythm DR-670 Owner's Manual

Chapter 3 Recording and Editing Patterns (Pattern Edit Mode)
Erasing Patterns
(Pattern Clear)
You can clear unneeded User patterns.
* The Preset patterns (1–200) cannot be cleared.
1. With the performance stopped, select the
User pattern to be cleared.
Turn the TEMPO/VALUE dial to select the
pattern number.
* You can also select the pattern by inputting the
pattern number with the numeric keys and
pressing [
* When selecting a fill pattern, press [FILL].
2. Hold down [SHIFT] and press [3] (CLEAR).
* Continue to hold down [SHIFT].
fig.03-22
Data to be cleared
3. While continuing to hold down [SHIFT],
rotate the TEMPO/VALUE dial to select the
data to be cleared.
When Selecting Basic Patterns
([FILL] Not Pressed)
All pattern data (the beat,
ALL:
measures, drum kit, recorded
basic pattern data, recorded fill
pattern data)
BSC: Basic pattern
BSC DRUM: Basic pattern drum part only
BSC BASS: Basic pattern bass part only
When Selecting Fill Patterns
([FILL] Is Pressed)
FIL: Fill pattern
FIL DRUM: Fill pattern drum part only
FIL BASS: Fill pattern bass part only
60
].
4. If you are sure you want to clear the data,
while still holding down [SHIFT], press
[ ].
Deletion of the User pattern is executed, and
when it is finished the display will indicate
"DONE."
5. When the data is all cleared, release
[SHIFT].
* To cancel the operation, release [SHIFT].
* If the selected pattern has not been recorded yet
(has no data recorded to it), "DATA EMPT" is
displayed without the deletion being executed.