Table of Contents
Advertisement
b. Tap a key pad, and continue holding it
down instead of releasing it.
c. While continuing to hold down the key pad,
press [
fig.03-19
d. Release the key pad.
fig.03-20
■ (6-2) Confirm the Recorded
Sounds
1. If recording is in progress, press [STOP] to
stop the recording.
The REC indicator goes out.
2. When you press [START], the recorded
pattern is played.
3. Press [STOP] to stop the performance.
Chapter 3 Recording and Editing Patterns (Pattern Edit Mode)
] to specify Step 2-4.
<7> Record the Fill Pattern
* The Beat, Measure, and Drum Kit settings are
common to both the basic pattern and the fill
pattern.
■ (7-1) Select the Fill Pattern
1. With the performance stopped, press
[FILL].
If there is no data recorded to that fill
pattern, check whether or not the basic
pattern has been copied.
fig.03-21
2. When copying, press [
When recording a new pattern instead of
copying, press [
■ (7-2A) Do Realtime Recording
■ (7-2B) Do Step Recording
These operations are identical to the recording
operations for the basic pattern.
Refer to p. 55–59.
■ (7-3) Confirm the Fill-In
When you have finished recording the fill
pattern, try using the Fill-In function (p. 50) to
check that the performances of the basic pattern
and the fill pattern join together smoothly.
* To return to recording of basic patterns, either
press [FILL] once more, or directly select the
pattern by entering the pattern number.
].
].
59
Hide quick links:
Advertisement
Table of Contents
