Rear Panel - Boss BR-1180 Owner's Manual

Panel Descriptions

Rear Panel

fig.00-24
14
1. GUITAR/BASS Jack
High-impedance input jack to directly connect your guitar or
bass.
2. MIC 2 jack (TRS Phone)
MIC 2 Connector (XLR Type)
Input jack/connector for use with mics. Two types are
provided, TRS balanced input (p. 27) and XLR balanced
input.
You can have +48 V phantom power supplied when using
the XLR type connectors.
"Using condenser mics" (p. 137)
* If mics are connected both to the TRS phone jack and the XLR
connector, the TRS phone jack is selected automatically.
* If an instrument is connected to the GUITAR/BASS jack
while a mic is also connected to the MIC 2 jack (or connector),
the GUITAR/BASS jack is selected automatically.
3. MIC 1 (VOCAL) Jack (TRS Phone)
MIC 1 (VOCAL) Connector (XLR Type)
These jacks allow a mic to be connected. Two types are
provided, TRS balanced input (p. 27) and XLR balanced
input.
You can have +48 V phantom power supplied when the XLR
type connectors are used.
"Using condenser mics" (p. 137)
4. LINE IN Jacks
These are input jacks for analog audio signals. These jacks
are used to connect CD players and other audio devices and
keyboards, rhythm machines, and other external sound
sources.
22
13
16 12 11 10
7
6
9 8 15
5
5. LINE OUT Jacks
These are output jacks for the analog audio signal. You can
connect MD recorders, tape recorders, or other recording
devices to record the output analog signal from the BR-1180/
1180CD.
* Depending on the settings, you can output a mix of the signal
input to LINE IN with the LINE OUT signal (Audio Sub
Mix: p. 138).
6. PHONES VOLUME Knob
Adjusts the headphone volume.
7. PHONES Jack
Headphones (sold separately) are connected here.
8. EXP PEDAL Jack
A separately sold expression pedal (Roland EV-5) can be
connected to this input jack. By using an expression pedal,
you can use the built-in effects processor to apply wah pedal
and other effects.
9. FOOT SW (Foot Switch) Jack
This is an input jack for connecting a separately sold foot
switch (BOSS FS-5U, Roland DP-2). You can use a foot switch
to start/stop a song, or to perform punch-in/out.
Using the foot switch (p. 45)
10. DIGITAL OUT Connector
Optical connector for outputting digital audio signals. The
same sound that is output from LINE OUT is also output
from DIGITAL OUT, so you can digitally record the output
from the BR-1180/1180CD to DAT recorders, MD recorders,
and other digital recording devices.
1
4 3 2