Boss BR-1180 Owner's Manual page 19

Flashing in green:
The track contains recorded data but has been muted
(silenced)
Flashing in red:
The track is selected as the recording destination, and is
in recording standby.
Red:
The track is now being recorded
Lighting alternately in orange and green:
This track contains recorded data and is selected for
recording.
Flashing in orange:
The track contains recorded data but has been muted,
and is also selected for recording
25. PHRASE TRAINER
Use this button to perform the settings for the phrase trainer
function.
CENTER CANCEL Button:
When using the Phrase Trainer, this button switches the
Center Cancel function on/off, allowing you to cancel
the vocal or other sound that is heard from the center.
When this is on, the button indicator will light.
"Canceling the center sound" (p. 132)
TIME STRETCH Button:
When using the Phrase Trainer, this button switches the
Time Stretch function on/off, allowing you to slow
down the playback speed. When this is on, the button
indicator will light.
"Slowing down the speed" (p. 131)
26. MASTERING TOOL KIT Button
Used in MASTERING mode, this button is used for
switching the Mastering Tool Kit on and off, and for calling
up the screen for changing the settings.
27. STEREO RHYTHM/LOOP
(Rhythm Guide/Loop Phrase Sequence)
Makes the settings affecting the Rhythm Guide and Loop
Phrase Sequence functions (p. 81, p. 92).
AUTO/ON/OFF Button:
Switches the Rhythm Guide function to Auto/On/Off
and the Loop Phrase Sequence On/Off.
EDIT Button:
Calls up the screen for setting the Rhythm Guide and
Loop Phrase Sequence patterns and tempos.
Fader 11
Adjusts the Rhythm Guide and Loop Phrase Sequence
volume levels.
TAP Button
You can set the tempos for the Rhythm Guide and Loop
Phrase Sequence to the timing you've used in tapping
this button.
28. V-TRACK Button
Use this button to call up the screen for selecting a V-Track.
"What are V-Tracks?" (p. 15)
"Utilizing the V-Tracks" (p. 48)
29. TRACK MUTE Button
By holding down this button and pressing a REC TRACK
button whose indicator is lit green, you can mute that track
during playback, regardless of the position of its TRACK
fader. When you repeat the same action, muting will be
defeated. While muted, the REC TRACK button of that track
will blink green. (p. 38)
* If a recording track was muted, muting will be defeated when
recording ends.
30. UTILITY Button
Pressed to access a variety of functions, including track
editing, song management, and disk operations.
31. UNDO/REDO Button
For undoing the last-performed recording or editing
operation and returning the data to its previous state. By
pressing this button once again, you can bring back the
canceled recording or re-execute the editing operation. (p. 75)
Panel Descriptions
19