MSI Z97-G55 SLI Instructions Manual page 78

▶ SVID Communication [Auto]*
Enables or disables SVID (Serial Voltage Identification) support.
[Auto] This setting will be configured automatically by BIOS.
[Enabled] PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled] Disables SVID (Serial Voltage Identification) support.
▶ VCCIN Voltage [Auto]
Sets the CPU input voltage. The CPU input voltage is the CPU power source that is
shared with components of the CPU.
▶ CPU Core/Ring/GT Voltage Mode [Auto]*
Selects the control mode for CPU Core/ Ring/ GT voltages.
[Auto] This setting will be configured automatically by BIOS.
[Adaptive Mode] Sets the adaptive voltage automatically for optimizing the system
performance.
[Override Mode] Allows you to set the voltage manually.
[Offset Mode] Allows you to set the offset voltage and select the voltage
offset mode.
[Adaptive + Offset ] Sets the adaptive voltage automatically and allows you to set the
offset voltage.
[Override + Offset ] Allows you to set the voltage and the offset voltage manually.
▶ CPU Core Voltage/ CPU Ring Voltage/ CPU GT Voltage [Auto]
Sets the CPU Core/ Ring/ GT voltages. If set to "Auto", BIOS will set these voltages
automatically or you can set it manually. This item appears when "CPU Core/Ring/GT
Voltage Mode" sets to [Auto]/ [Adaptive Mode]/ [Override Mode].
▶ CPU SA/IOA/IOD Voltage Mode [Manual Mode]*
Selects the control mode for CPU SA/ IOA (IO Analog)/ IOD (IO Digital) voltages.
[Manual] Allows you to set the voltage manually.
[Offset] Allows you to set the offset voltage and select the voltage offset mode.
▶ CPU SA/ IO Analog/ IO Digital Voltage Offset Mode [Auto]*
Selects the offset mode for CPU SA/ IO Analog/ IO Digital voltage. This item appears
when "CPU SA/IOA/IOD Voltage Mode" sets to [Offset Mode].
[Auto] This setting will be configured automatically by BIOS.
[+] Allows you to offset the voltage by positive value mode.
[-] Allows you to offset the voltage by negative value mode.
▶ XXX Voltage [Auto]* (optional)
Sets the voltages related to memory/ PCH. If set to "Auto", BIOS will set the voltage
automatically or you can set it manually.
< Other Setting >
▶ CPU Memory Changed Detect [Enabled]*
Enables or disables the system to issue a warning message during boot when the
CPU or memory has been replaced.
[Enabled] The system will issue a warning message during boot and than needs
to load the default settings for new devices.
[Disabled] Disables this function and keeps the current BIOS settings.
BOIS Setup BOIS Setup 3-22 3-22