Replacing Filters - Electrolux Pure Multi 700 Operating Manual

REPLACING FILTERS

REPLACE HEPA FILTERS
NOTE: The filters – except for the mesh pre-filter and humidification filter - cannot be washed and
must always be replaced when at end of life. The air purifier have a variety of filters to choose from,
tailored to your lifestyle needs. Head over to the Electrolux App or the product information page
on our website for a guide on choosing the appropriate filter for your needs. Please visit your local
electrolux website to order your replacement filter.
28. For the best experience and to secure an uninterrupted use of the air purifier, please monitor
the filter's remaining lifetime in the Electrolux App and order a replacement filter in due time
before the remaining filter lifetime reaches 0%. If you have notifications enabled, the Electrolux
App will inform you when the filter life is close to end of life (e.g. at 5%).
29. When one or more of the filters is at end of life, the filter change icon will light up on the
product control panel to indicate the need for replacement. Please head over to the Electrolux
App to correctly identify which filter is at end of life and needs replacement. When filter is at
end of life, the unit's fan speed may be reduced in SMART mode.
30. The used filter might be heavily coated with dust and particulate matter so before opening the
front panel, please ensure a disposable bag or packaging is at hand to place the used filter in.
31. Turn OFF the air purifier or unplug the unit before changing the filters, to ensure that the filter
change icon will be turned OFF. Remove the front panel and the mesh pre-filter and put them
aside. Next remove the filter which is at end of life and place it in the disposable bag at hand.
32. Next, please remove the plastic packaging from the replacement filter and insert the filter in
the appropriate place. Please ensure the VOC odor filter goes in first inside the unit, followed
by the ultrafine particle filter. Reinsert the mesh pre-filter, close the front panel and turn ON the
unit. The filter change icon on the product control panel will no longer be lit and the Electrolux
App will indicate the same, with a new filter lifetime reading.
NOTE: In case the change is only reflected on the product control panel and not the Electrolux
App, please restart the App and the unit, before further troubleshooting.
33. Discard the used filter as well as any plastic packaging according to local recycling guidelines.
10 www.electrolux.com