Plug Replacement - Homebase FS40-3 Instruction Manual

PLUG REPLACEMENT

Connect Blue
to N (Neutral)
Outer sleeve
firmly clamped
If you need to replace the fitted plug, then follow the
instructions below.
WARNING! The wires in the mains lead are coloured in
accordance with the following code:
Blue – Neutral
Brown – Live
As the colour of the wire in the mains lead of this appliance
may not correspond with the coloured marking identifying
the terminals in your plug, proceed as follows:
The blue wire must be connected to the terminal marked N
or coloured black.
The brown wire must be connected to the terminal marked
L or coloured red.
WARNING! Never connect live or neutral wires to the
earth terminal of the plug. Only fit an approved BS 1363 or
BS 1363/A plug and correctly rated BS 1362 3 Amp fuse. If
in doubt, consult a qualified electrician.
NOTE: If a moulded plug is fitted and has to be removed,
take great care in disposing of the plug and severed cable;
it must be destroyed to prevent it being accidentally
plugged into a power socket.
Fuse
approved to
BS 1362
Brown L (Live)
Cable grip
9