Table of Contents
Advertisement
Saving Your Performance
5
Specify the song name and the save-destination song number.
fig.disksave2.e
Song name
Displays the name of
the song to save.
Characters that can
be input:
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
abcdefghijklmn
opqrstuvwxyz
0123456789!"#$%&'
()*+-/:;<=>?@[\]^_`{|}
Space
6
Follow the on-screen directions to begin saving the data.
The time required for saving will range from several seconds to half a minute or more.
*
Never remove the floppy disk from the disk drive until saving is complete.
● Some notes on saving a song
• Due to certain types of handling, the data on a floppy disk can be damaged and become
unplayable. We recommend that important song data be saved on two floppy disks.
• When a song is played back on some other devices, notes may drop out or may be played
differently.
• When you are finished saving, set the protect tab of the floppy disk to the "protect" position (p.
6). This will prevent the song from being accidentally erased.
38
Save Destination
Displays the save-destination song number.
If you select a song number that displays a
song name, and save a new song, the
previous song will be erased.
Change the character,
change the song number
When the cursor is located at the
song name item, change the
character at the cursor location.
When the save-destination item is
highlighted in white, change the
save-destination song number.
Move the cursor,
select an item to set
Finalize the setting
and proceed to the
next screen
Return to the
previous screen
Advertisement
Table of Contents
