Table of Contents
Advertisement
This setting:
Notification Tone Volume
The notification tone volume can be adjusted within the range of
0 (muted) to 10 (maximum).
Notification Tone Set Selection
Your Digital Piano lets you know the results of operations by sounding
notification tones. You can select from among three different notification
tone sets.
Panel Lock
While this setting is enabled, the LEDs of all touch buttons, except
3 FUNCTION, are turned off, and all operations are disabled at all
times, except for those below. While Auto is selected for this setting,
operations are disabled during performances only.*
• 1P (Power) button power operations. Turning off Digital Piano
power cancels panel lock.
• Touch button operation to cancel Panel Lock.
* Pressing any key or pedal is interpreted as the start of a performance and causes operation to be locked.
■ To change the panel light setting
1.
Hold down 3 FUNCTION.
• Do not release 3 FUNCTION until step 3, below.
2.
Press the G7 keyboard key.
Each time the G7 keyboard key is pressed to change this setting, a notification tone sounds to indicate the newly selected
setting.
Notification Tone*
Off tone
Option tone × 1
Option tone × 2
Option tone × 3
Option tone × 4
* For more information, see
3.
After the setting is the way you want, release 3 FUNCTION.
• Turning on the Digital Piano under battery power only (without AC adaptor power) will cause the Panel Light Setting to change
automatically to 60 seconds to conserve power. You can change the Panel Light Setting if you want.
Setting
Off
5 seconds
30 seconds
60 seconds
120 seconds
"Notification
Tones" (page EN-11).
Pressing
this key:
A7
B}7
A7 + B}7
B7
C8
Touch button lights remain lit.
After non-operation of the front panel for the specified time, the lights
of all touch buttons, except for 3 FUNCTION, will turn off.
Configuring Settings
Does this:
Lowers the notification tone volume by 1.
Raises the notification tone volume by 1.
Returns the notification tone volume to its
initial default setting.
Cycles the setting to the next notification
tone set (1, 2, 3).
Cycles between off, on and auto. Even
after selecting ON for this setting, you can
change the setting by holding down
3 FUNCTION and pressing the C8
keyboard key.
Off: Off tone
On: Option tone × 1
Auto: Option tone × 2
Description
EN-47
Advertisement
Table of Contents
