Sharp PN-L Series Operation Manual page 55

n Starting the secondary display
In whiteboard mode:
1. Start whiteboard mode.
2. Displays the whiteboard in a window. (Page 16)
3. Move the window of the whiteboard to the secondary display.
4. Maximize the window of the whiteboard. (Page 16)
In overlay mode:
1. Follow the step 1-4 above.
2. Exit whiteboard mode.
3. Start overlay mode.
TIPS
• The display that started is stored. The stored display is started.
• If the "Startup display when secondary display exists" setting is set to "Show dialog and select", you can select the monitor
that is displayed when this software is started.
55
E