Sharp PN-L Series Operation Manual page 40

n Cutting an object
You can cut an object and save it to the clipboard.
1. Select an object. (Page 37)
2. Select "Cut" from the expansion menu.
TIPS
• To manipulate multiple objects at once, follow the steps in "Selecting multiple objects" (page 38).
n Duplicating an object
1. Select an object. (Page 37)
2. Select "Duplicate" from the expansion menu.
TIPS
• To manipulate multiple objects at once, follow the steps in "Selecting multiple objects" (page 38).
n Deleting an object
1. Select an object. (Page 37)
2. Select "Delete" from the expansion menu.
TIPS
• "Clear Sheet" in "Eraser" can be used to delete all objects on the current sheet (page 30).
• To manipulate multiple objects at once, follow the steps in "Selecting multiple objects" (page 38).
n Trimming an object (image)
1. Select an object (image). (Page 37)
Objects other than images cannot be trimmed.
2. Select "Trimming" from the expansion menu.
3. Drag on the edge of image to specify the area you want to trim.
4. After checking the above preview, touch "OK".
TIPS
• To return to the state prior to trimming, use "Undo" (page 42), or repeat steps 1 to 2 above, select "Select Entire Image", and
touch "OK".
• Multiple image files cannot be trimmed at once.
n Pasting an object
To paste the object in the clipboard, select "Paste" in the menu.
40
E