Table of Contents

Advertisement

Available languages

Available languages

Quick Links

YT48
Operator's Manual
WARNING:
Read this Man u al and follow all Warnings
and Safety Instructions. Fail ure to do so
can re sult in serious in ju ry.
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine.
The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty.
10.21.14 BD
587 70 04-26
Printed in the U.S.A.

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Jonsered YT48

  • Page 1 YT48 Operator's Manual WARNING: Read this Man u al and follow all Warnings and Safety Instructions. Fail ure to do so can re sult in serious in ju ry. Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine.
  • Page 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Be alert and turn machine off if a child enters the area. WARNING: In order to prevent ac ci den tal •...
  • Page 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers III. SLOPE OPERATION • Never remove gas cap or add fuel with the engine running. • Allow engine to cool before refueling. WARNING! When loading or unloading • Never fuel the machine indoors. this machine, do not exceed the maximum •...
  • Page 4: Table Of Contents

    PRODUCT SPECIFICATIONS CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manu fac tured to give you the best possible dependability and performance. Gasoline Capacity 3.0 Gallons (11,36 L) and type: Unleaded Regular Should you experience any problem you cannot easily remedy, please contact your nearest authorized service Oil Type: SAE 10W30 (above 32°F/0°C)
  • Page 5: Unassembled Parts

    UNASSEMBLED PARTS Keys Slope Sheet (1) Oil Drain Tube Key(s) ASSEMBLY Your new tractor has been assembled at the factory with exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY A socket wrench set will make assembly easier. Stan dard wrench sizes are listed.
  • Page 6: Assembly

    ASSEMBLY ✓ NOTE: You may now roll your tractor off the skid. Continue CHECKLIST using the instructions that follow to remove the tractor from the skid. BEFORE YOU OPERATE YOUR NEW TRAC TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST WARNING: Before start ing, read, un der stand and fol- PERFORMANCE AND SATISFACTION FROM THIS low all in struc tions in the Op er a tion section of this man u al.
  • Page 7: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE ENGINE ENGINE DIFFERENTIAL CLUTCH/ PARKING MOWER MOWER START LOCK BRAKE PEDAL BRAKE HEIGHT LIFT...
  • Page 8 OPERATION KNOW YOUR TRACTOR READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Fig.
  • Page 9 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 10 OPERATION The cutting height range is ap prox i mate ly 1 to 4" (25,4 to TO MOVE FORWARD AND BACKWARD 101,6 mm). The heights are measured from the ground to (See Fig. 7) the blade tip with the engine not running. These heights are The direction and speed of movement is controlled by the approximate and may vary depending upon soil conditions, forward and reverse drive pedals.
  • Page 11 OPERATION TO STOP MOWER BLADES • Choose the slowest speed before starting up or down hills. Disengage at tach ment clutch con trol. • Avoid stopping or changing speed on hills. • If stopping is absolutely necessary, push brake pedal CAUTION: Do not operate the mower quickly to brake position and engage parking brake.
  • Page 12 OPERATION BEFORE STARTING THE ENGINE TO START ENGINE (See Fig. 16) When starting the engine for the first time or if the engine CHECK ENGINE OIL LEVEL has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.
  • Page 13 OPERATION PURGE TRANSMISSION MOWING TIPS • DO NOT use tire chains when the mower hous ing is CAUTION: Never engage or disengage free- attached to tractor. wheel lever while the engine is run ning. • Mower should be properly leveled for best mowing performance.
  • Page 14: Maintenance Schedule

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure Check Operator Presence and ROS Systems Check for Loose Fasteners Check/Replace Mower Blades Lubrication Chart Check Battery Level Clean Battery and Terminals Clean Debris off Steering Plate Check Transaxle Cooling...
  • Page 15: Maintenance

    MAINTENANCE TRACTOR BLADE CARE For best results mower blades must be kept sharp. Re place Always observe safety rules when per form ing any bent or damaged blades. main te nance. BRAKE OPERATION CAUTION: Use only a replacement blade ap- proved by the manufacturer of your tractor.
  • Page 16 MAINTENANCE TO CHANGE ENGINE OIL (See Fig. 15 & 16) V-BELTS Check V-belts for deterioration and wear after 100 hours Determine temperature range expected before oil change. of operation and replace if necessary. The belts are not All oil must meet API service classification SG-SL. ad just able.
  • Page 17 MAINTENANCE CLEAN AIR SCREEN CLEANING The air screen is over the air intake blower located on top • Clean engine, battery, seat, finish, etc. of all foreign of engine. The air screen must be kept free of dirt and matter. chaff to prevent engine dam age from overheating.
  • Page 18 MAINTENANCE DECK WASHOUT PORT (See Fig. 19) Your tractor’s deck is equipped with a washout port as part of its deck wash system. It should be utilized after each use. 1. Drive the tractor to a level, clear spot on your lawn, near enough to a water spigot for your garden hose to reach.
  • Page 19: Service And Adjustments

    SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SER VICE OR AD JUST MENTS: • Depress brake pedal fully and set parking brake. • Place attachment clutch in “DISENGAGED” position. • Turn ignition key to “STOP” and remove key. •...
  • Page 20 SERVICE AND ADJUSTMENTS 2. ASSEMBLE FRONT GAUGE WHEEL (W) TO FRONT 5. INSTALL ANTI-SWAY BAR (S) (IF EQUIPPED) OF MOWER (See Fig. 23) (See Fig. 26 - 28) H. FRONT MOWER ANTI-SWAY BAR (S) BRACKET W. FRONT GAUGE TOWARDS TOWARDS WHEEL TRANSAXLE MOWER DECK...
  • Page 21 SERVICE AND ADJUSTMENTS 6. ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • Insert other end of link (E) into hole in front mower CHASSIS (See Fig. 29) bracket (H) and secure with washer and small retainer spring (J). • Position front hole in side suspension arm (A) over pin on outside of tractor chassis and secure with large NOTE: Requires deck lifting.
  • Page 22 SERVICE AND ADJUSTMENTS TO LEVEL MOWER • Recheck measurements, adjust if necessary until both sides are equal. Ensure tires are properly inflated to the PSI shown on tires. FRONT-TO-BACK ADJUSTMENT (See Figs. 35 & 36) If tires are over or under inflated, it may affect the appear- ance of your lawn and lead you to think the mower is not IMPORTANT: Deck must be level side-to-side.
  • Page 23 SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT TO REPLACE MOTION DRIVE BELT (See Fig. 37) (See Fig. 38) Park the tractor on level surface. En gage parking brake. MOWER DRIVE BELT REMOVAL For as sis tance, there is a belt installation guide decal on •...
  • Page 24 SERVICE AND ADJUSTMENTS TO START ENGINE WITH A WEAK BATTERY TO CHECK BRAKE (See Fig. 40) If tractor requires more than five (5) feet (1,5 m) to stop at highest speed in high est gear on a level, dry concrete or WARNING: Lead-acid batteries gen- paved surface, then brake must be serviced.
  • Page 25 SERVICE AND ADJUSTMENTS REPLACING BATTERY (See Fig. 41) TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 42) WARNING: Do not short battery ter mi- • Raise hood. nals by allowing a wrench or any other • Unsnap headlight wire connector. object to contact both terminals at the •...
  • Page 26: Storage

    STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS WARNING: Never store the trac tor with FROM FORMING IN ES SEN TIAL FUEL SYSTEM PARTS SUCH gas o line in the tank inside a building AS CARBURETOR, FUEL FIL TER, FUEL HOSE, OR TANK...
  • Page 27: Trou Ble Shoot Ing

    TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION 1. Out of fuel. 1. Fill fuel tank. Will not start 2. Engine not “CHOKED” properly. 2. See “TO START ENGINE” in Operation section. 3. Engine flooded. 3. Wait several minutes before attempting to start. 4.
  • Page 28 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Engine continues to 1. Faulty operator-safety presence control 1. Check wiring, switches and connections. If not system. corrected, contact an authorized service center/ run when operator department. leaves seat with attachment clutch CAUTION: DO NOT operate machine until engaged problem is corrected.
  • Page 30 SERVICE NOTES...
  • Page 31 YT48 Manual de Operario ADVERTENCIA: Leer, entender y seguir todas las instruc- ciones sobre la máquina y en el manual antes de empezar. Si no se observan las in- strucciones de seguridad siguientes se pu- eden producir lesiones graves o la muerte.
  • Page 32 REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles PELIGRO: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS MANOS Y LOS PIES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. •...
  • Page 33 REGLAS DE SEGURIDAD Prácticas de Operación Seguras para las Segadoras Conducibles • Mantener la máquina libre de hierba, hojas u otros es- • Apagar todos los cigarrillos, cigarros, pipas y otras fuentes combros que pueden tocar el tubo de escape / partes del de ignición.
  • Page 34: Especificaciones Del Producto

    ESPECIFICACIONES DEL PRODUCTO FELICITACIONES por la compra de su tractor. Ha sido diseñado, planificado y fabricado para darle la mejor confiabilidad y el mejor rendimiento posible. Capacidad y Tipo 3.0 Galones (11,36 L) de gasolina: Regular Sin Plomo En el caso de que se encuentre con cualquier problema que no pueda solucionar fácilmente, haga el favor de ponerse en con- Tipo de Aceite: SAE 10W30 (Sobr 32°F/0°C)
  • Page 35: Piezas Sin Montar

    PIEZAS SIN MONTAR Llaves Hoja de pendiente (1) Tubo de desagüe Llaves MONTAJE Su tractor nuevo ha sido montado en la fábrica con la excepción de aquellas partes que no se han montado por razones de envío. HERRAMIENTAS NECESARIAS PARA EL MONTAJE Un juego de llaves de tubo facilitará...
  • Page 36: Montaje

    MONTAJE ✓ AVISO: Ahora puede sacar el tractor de la tarima. Continúe usando LISTA DE REVISIÓN las instrucciones que siguen para retirar el tractor de la tarima. ADVERTENCIA: Antes de empezar, leer, entender y seguir ANTES DE OPERAR Y DE DISFRUTAR DE SU TRACTOR NUEVO, LE DESEAMOS QUE RECIBA EL MEJOR todas las instrucciones presentes en la sección Operaciones RENDIMIENTO Y LA MAYOR SATISFACCION DE ESTE...
  • Page 37: Operación

    OPERACIÓN Estos símbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y compren- da sus significados. MARCHA NEUTRO ALTO BAJO ESTRANGU- RÁPIDO LENTO INTERRUPTOR ATRÁS LACIÓN DE IGNICIÓN MOTOR MOTOR MOTOR EL CIERRE PEDAL DE FRENO DE ALTURA LEVANTA-...
  • Page 38 OPERACIÓN FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DEL OPERARIO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro.
  • Page 39 OPERACIÓN La operación de cualquier tractor puede hacer que salten objetos extraños dentro de sus ojos, lo que puede producir daños graves en éstos. Siempre use anteojos de seguridad o pro tec cio nes para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones. Recomendamos gafas de seguridad o una máscara de visión amplia de seguridad usada sobre las gafas.
  • Page 40 OPERACIÓN MOVERSE HACIA ADELANTE Y HACIA ATRÁS • Coloque la palanca elevadora en la ranura de la altura de- seada. (Vea Fig. 7) La gama de la altura de corte es de aproximadamente 25,4 a La dirección y la velocidad de movimientos están controlados 101,6 mm (1 a 4 pulgadas).
  • Page 41 OPERACIÓN PARA PARAR LAS CUCHILLAS DE LA SEGADORA PARA OPERAR EN CERROS • Desenganche el control del embrague del accesorio. ADVERTENCIA: No maneje hacia arriba PRECAUCIÓN: No opere la segadora sin, ya sea, o hacia abajo en cerros con pendientes el recogedor de césped completo en las sega- su pe rio res a 15°...
  • Page 42 OPERACIÓN MECANISMO DE AVISO DE SERVICIO / CRONÓ- PRECAUCIÓN: Los combustibles mezclados con al- METRO cohol (llamados gasohol o que usan etanol o metanol) El recordatorio de servicio muestra el número total de horas de pueden atraer la humedad, lo que provoca la separación funcionamiento del motor e indica el momento en que el motor o y formación de ácidos durante el almacenamiento.
  • Page 43 OPERACIÓN ARRANQUE CON TIEMPO FRÍO (50°F/10°C y menos) Sentado en el asiento del tractor, empiece el motor. Des pués que este corriendo el motor, mueva el control de es tran gu- • Cuando arranque el motor, empuje lentamente el control de la ción media (1/2) velocidad.
  • Page 44: Mantenimiento

    MANTENIMENTO ANTES CADA CADA CADA CADA CADA ALMACEN- PROGRAMA DE MANTENIMIENTO DE CADA TEMP- AMIENTO HORAS HORAS HORAS HORAS ORADA Revisar la operación del freno Revisar la presión de las llantas Verificar la sistemas presencia del operador y sistemas "ROS" Revisar si hay sujetadores sueltos Afilar/cambiar las cuchillas de la segadora Tabla de lubricación...
  • Page 45 MANTENIMENTO TRACTOR PRECAUCIÓN: Usar solamente la hojas de repues- Siempre observe las reglas de seguridad cuando dé mante ni- to aprobada por el fabricante de su cortacésped. mien to. Usar una hoja no aprobada por el fabricante de su cortacésped es peligroso, puede dañar su OPERACIÓN DEL FRENO cortacésped y anular su garantía.
  • Page 46 MANTENIMENTO CORREAS "V" PARA CAMBIAR EL ACEITE DEL MOTOR (Vea Fig. 15 y 16) Revise las correas "V" para verificar si existe deterioro y desgaste después de 100 horas de operación y cámbielas si es necesario. Determine la gama de la temperatura esperada antes de cam- Las correas no son ajustables.
  • Page 47 MANTENIMENTO LIMPIEZA FILTRO DEL AIRE • Limpie todo material extraño del motor, la batería, el asiento, Su motor puede sufrir averías y funcionar de manera incorrecta con el pulido, etc. un filtro del aire sucio. Déle servicio al filtro de aire más a menudo si se usa en condiciones polvorosas.
  • Page 48 MANTENIMENTO PUERTO DE LAVADO DE LA CUBIERTA (Vea Fig. 19) La plataforma del tractor está equipada con un puerto de lavado como parte del sistema de lavado de la plataforma. Se debe utilizar después de cada uso. Lleve el tractor a un lugar horizontal y despejado de su césped, lo bastante cerca de una boca de riego como para que llegue la manguera del jardín.
  • Page 49: Servicio Y Ajustes

    SERVICIO Y AJUSTES ADVERTENCIA: PARA EVITAR LESIÓNES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE HACER AJUSTES: • Presione el pedal de freno completamente y aplique el freno de estacionamiento. • Ponga el embrague del accesorio en la posición desenganchado (DISENGAGED). •...
  • Page 50 SERVICIO Y AJUSTES 2. ARME LA RUEDA CALIBRADORA DELANTERA (W) EN 5. SI LA TIENE, INSTALE LA BARRA ANTIBALANCEO (S) LA PARTE DELANTERA DE LA CORTADORA DE CÉSPED (Vea Fig. 26 - 28) (Vea Fig. 23) BARRA ANTIBALANCEO (S) H. ESCUADRA DE LA CORTADORA DE HACIA EL HACIA LA PLATAFORMA DE...
  • Page 51 SERVICIO Y AJUSTES 6. INSTALE LOS BRAZOS DE SUSPENSIÓN LATERAL DE • Inserte el otro extremo del eslabón (E) en el agujero de la LA CORTADORA DE CÉSPED (A) EN EL CHASIS escuadra derecha de la cortadora de césped (H) y asegure (Vea Fig.
  • Page 52 SERVICIO Y AJUSTES PARA NIVELAR LA SEGADORA AJUSTE DE DELANTE A ATRÁS (Vea Fig. 35 y 36) Asegúrese de que los neumáticos estén inflados a la PSI que se IMPORTANTE: El piso debe quedar bien nivelado de lado a lado. indica en estos.
  • Page 53 SERVICIO Y AJUSTES PARA REEMPLAZAR LA CORREA DE LA CUCHILLA PARA CAMBIAR LA CORREA DE IMPULSIÓN DE MOVIMIENTO DE LA SEGADORA (See Fig. 37) (Vea Fig. 38) Estacione el tractor en una superficie nivelada. Ponga el freno DESMONTAJE DE LA CORREA DE LA SEGADORA de mano.
  • Page 54 SERVICIO Y AJUSTES PARA HACER ARRANCAR EL MOTOR CON UNA CONTROLAR Y AJUSTAR EL FRENO BATERÍA BAJA (Vea Fig. 40) Si el tractor exige más de cinco (5) pies para pararse a una velo- cidad más alta en el cambio más alto en una superficie nivelada ADVERTENCIA: Las baterías de ácido- de hormigón seco o pavimentada, entonces se debe controlar plo mo generan gases explosivos.
  • Page 55 SERVICIO Y AJUSTES REEMPLAZAR LA BATERIA (Vea Fig. 41) PARA REMOVER EL CONJUNTO DEL CAPOTA Y DEL ENREJADO (Vea Fig. 42) ADVERTENCIA: No haga cortocircuito con los • Levante el capota. terminales de la batería al permitir que una llave de tuerca o cualquier otro objeto entre •...
  • Page 56: Almacenamiento

    ALMACENAMIENTO MOTOR Inmediatamente prepare su tractor para el almacenamiento al final de la temporada o si el tractor no se va a usar por 30 días o más. SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos Advertencia: Nunca almacene el tractor con de goma en partes fundamentales del sistema de combus-tible gasolina en el estanque dentro de un edificio tales como el carburador, el filtro del com bus ti ble, la manguera...
  • Page 57: Identificación De Problemas

    IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN No arranca Sin combustible. Llene el estanque de combustible. Motor sin la “ESTRANGULACIÓN” (CHOKE) Vea “PARA HACER ARRANCAR EL MOTOR” en la sec- adecuada. ción de operación. Motor ahogado. Espere varios minutos antes detratar de arrancar. Bujía mala.
  • Page 58 IDENTIFICACIÓN DE PROBLEMAS PROBLEMA CAUSA CORRECCIÓN El motor continúa Sistema de control que exige la presencia del Revise el alambrado, los interruptores y la conexiones.Si operador –seguridad fallado. no están correctas, pongase en contacto con un centro funcionando cuando de servicio cualificado. el operador se baja del asiento con el PRECAUCIÓN: NO opere la máquina sino hasta haber...
  • Page 60 AVISO...

Table of Contents