9-Troubleshooting - Haier HWF75AW3 User Manual

NZ AU
of a problem please check all shown possibilities and follow below instructions before you
WARNING!
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
improper repairs can cause considerable consequential damages.
A damaged power cable should only be replaced by the manufacturer, its service
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
Automatic load detection is working; only in some programmes.
Door is closed because of high water level, high water temperature or spinning cycle.
The keylock is activated. Deactivate to make changes to the selection.
The garment function is working.
Restore the default parameters for all programmes.
9.2 Troubleshooting with display code
Problem Cause
・
・
・
・
・
22
Drainage error, water is not fully drained
within 6 minutes.
Lock error.
Water level has not been reached for a
long time
Drain hose is self-syphoning.
Water protective level error.

9-Troubleshooting

Solution
・
・ Check drain hose installation.
・ Shut the door properly.
・
Make sure that tap is fully opened and water
pressure is normal.
・ Check drain hose installation.
・ Contact the After sales service.