Haier HWF75AW3 User Manual page 26

NZ AU
10.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transportation bolts removed
before installation to prevent damage: The assembiy takes place in reverse order.
10.5 Aligning the appliance
Adjust all feet (Fig. 10-5) to achieve a complete level position. This will minimize
and thus noise during use. It will also reduce wear and tear. We recommend to
vibra tions
a spirit level for adjustment. Floor should be as stable and flat as possible.
1. Loose the locknut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten lockut (1) against the housing.
26
10-5
10-Installation