Table of Contents
Advertisement
Multisample editing functions
4.
When you've finished inputting the
name, press [F8 (Write)].
A screen will appear, allowing you to
select the write destination.
fig.04-11_40
5.
Turn the VALUE dial or use [INC][DEC]
to select the write destination.
Multisamples consisting of user samples
will be written to User memory, and
multisamples consisting of card samples
will be written to Card memory.
6.
Press [F8 (Write)].
A message will ask you to confirm the
Write operation.
fig.04-12_40
7.
If you are sure you want to write the
multisample, press [F8 (Exec)].
Never turn off the power while data is
being written.
32
8.
When the multisample has been written, the
Assign to Keyboard window will appear.
fig.04-13_40
* If you're in Performance mode, a screen will
appear, allowing you to select the Part to which
the multisample is to be assigned. Use
to select a part, and then press [F8
(Select)].
9.
Press [F8 (Exec)].
A screen will ask you for confirmation.
If you decide to cancel, press [F7 (Cancel)].
10. Press [F8 (Exec)] once again.
Never turn off the power while data is
being written.
11. The Multisample Edit screen will appear.
* For details on editing, refer to "Editing a
multisample" (p. 35).
fig.04-14_40
12. Save the multisample.
* For details on how to save, refer to "Saving a
multisample" (p. 40).
13. Save the patch.
* For details on how to save a patch, refer to
"Saving Patches You've Created (Write)"
(Owner's Manual; p. 59).
or
Advertisement
Table of Contents
