Kenmore Lift-Up DU5092 Use & Care Manual page 16

Bagless upright vacuum with hair eliminator brushroll
Hide thumbs Also See for Lift-Up DU5092:
Table of Contents

Advertisement

CAUTION
Always return the vacuum cleaner to
the upright position before using the
hose and attachments. Failure to do
so may result in overheating of the
brushroll motor and can cause the
thermal protectors to trip.
Check for and remove clogs, and empty
the dust cup if necessary. Also check
and clean any clogged filters. Wait
approximately 50 minutes before restarting
vacuum cleaner.
HAIR ELIMINATOR
For best performance, the motorized
nozzle is equipped with a hair eliminator
brushroll, which prevents build-up of hair,
string and other debris on the brushroll.
To remove any hair wrapped around the
brushroll, simply continue vacuuming,
allowing the brushroll to automatically
remove the hair wrap and send it to the
dust cup.
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
brushroll when vacuum is on. Contacting
the brushroll while it is rotating can cut,
bruise or cause other injuries.
PERFORMANCE/SAFETY FEATURES
TM
BRUSHROLL
Comb Teeth
BRUSHROLL RESET
The brushroll has built-in protection against
motor damage should the brushroll jam.
If the brushroll slows down or stops, the
brushroll overload protector shuts off the
brushroll motor and the brushroll indicator
light emits red light. The vacuum cleaner
suction motor will continue to run.
Brushroll
Indicator
Light
To solve the problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
turn on the vacuum cleaner.
NOTE
: Once the brushroll motor shuts
down, clear jam from brushroll and then
restart the vacuum cleaner. If the problem
persists, contact the vacuum cleaner help
line for assistance.
SUCTION CONTROL
To assist with push/pull force of the
vacuum on surfaces like thick carpet, the
suction control valve can be opened to
help reduce suction. Note that for best
cleaning results, the suction control valve
must be fully closed.
· Slide to right to open the suction control
and decrease suction. Opening control
decreases suction for draperies and
lightweight rugs.
· Slide to left to close the suction control
and increase suction. Closing control
increases suction for upholstery and
carpets.
Decrease Suction
- 16 -
Increase Suction

Advertisement

Table of Contents
loading

Table of Contents