Table of Contents
Advertisement
Advanced programmings and registrations
When "EJ FULL" sign appears on the display
When the register shows this sign, issue electronic journal
read report (if necessary) and reset the memory immediately.
In case of power failure
If the power supply to the cash register is cut by a power failure or any other reason, simply wait for
power to be restored. The details of any ongoing transaction as well as all sales data in memory are
protected by the memory backup batteries. (This is the reason to install the batteries.)
• Power failure during a registration
The subtotal for items registered up to the power failure is retained in memory. You will be able to con-
tinue with the registration when power is restored.
• Power failure during printing a read / reset report
The data already printed before the power failure is retained in memory. You will be able to issue a
report when power is restored.
• Power failure during printing of a receipt / journal
Printing will resume after power is restored. A line that was being printed when the power failure oc-
curred is printed in full.
• Other
The power failure symbol is printed and any item that was being printed when the power failure oc-
curred is reprinted in full.
In case the register is locked up
If you make a mistake in operation, the cash register may lock up to avoid damage to programs and
preset data. Should it happens, you can use the following procedure to clear the lock up without losing
any data.
1
Insert the PGM key in the mode switch.
2
Turn the mode switch to OFF mode.
3
Press down f, and turn the mode switch to PGM mode.
4
The display shows "FFFFFFFFFF", then release f.
5
Press,
then issue a receipt.
o
E-147
Advertisement
Chapters
Table of Contents
