Table of Contents
Advertisement
Advanced programmings and registrations
To format an SD card
When you use unformatted new SD card, you must format the SD card first.
It may take time to access to an SD card immediately after it is formatted. All the data stored in
the SD card will be cleared if you execute formatting.
Step
1
Insert an SD card into the SD card slot.
2
Turn the Mode switch to PGM position and select [SD card].
3
Press
key.
F
Select [SD Format] on the SD card setting screen.
4
Select [YES] and press
The register starts to format the SD card.
5
Now the SD card is formatted and you can use it for storing
cash register data in it.
key.
F
E-138
Display
C01
PGM
[ Clerk Setting
[ Message Setting
[ POP Setting
[ Tax Setting
[ General Setting
[ Paper Roll Setting
[ Watermark Setting
[ SDcard
Select & <CA/AMT TEND>
SD card
Backup→SD
Restore←SD
Program→SD
Program←SD
SD Format
Backup→Flash
Select & <CA/AMT TEND> or
Cancel <SUB TOTAL>
SDcard
SD Format
YES
NO
Select & <CA/AMT TEND> or
Cancel <SUB TOTAL>
SDcard
SD Format
Format Complete.
Press <SUB TOTAL>
]
]
]
]
]
]
]
]
Advertisement
Chapters
Table of Contents
