Cleaning The Exterior And The Control Panel; Cleaning The Drum - Miele T 8033 C Operating And Installation Instructions

Dryer care
The lint filters can be rinsed with hot
water if necessary.
^ Take the door lint filters out by turning
the knob at the filter top.
^ Rinse all lint filters with hot water and
dry thoroughly.
The filters must be dry before being
returned to the dryer. Wet filters
might impair the dryer operation.
^ Return the lint filters. Lock the door
frame filters.
16
Cleaning the exterior and the
control panel
,
To reduce the risk of electric
shock, disconnect the dryer from the
power supply by shutting off the
power main, tripping the circuit
breaker or unplugging the power
cord before performing
maintenance.
Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dryer. They
will damage the surface.
^ The exterior and the control panel
can be cleaned with warm water and
liquid dish soap applied with a soft
sponge.
^ Wipe dry.

Cleaning the drum

^ The stainless steel surfaces of the
drum can be cleaned using a
non-abrasive stainless steel cleaner.
^ Wipe clean with a soft cloth.