Getting Started - Siemens SITRANS P320 Compact Operating Instructions

Getting started

Before you commission the device, observe the following safety notes:
• General safety notes (Page 17)
• Basic safety notes: Installing/mounting (Page 23)
• Basic safety notes: Connecting (Page 37)
• Basic safety notes: Commissioning (Page 45)
Read the entire device manual to achieve the optimum performance of the device.
Procedure
1. Install the device.
Installation (level) (Page 31)
Installation (except level) (Page 27)
2. Connect the device.
Connecting the device (Page 41)
3. Switch on the supply voltage.
Switching on the supply voltage (Page 43)
4. If you want to change the factory settings, configure the device using the local or the remote
operation.
– Read the operating instructions for information on this.
5. Lock the device.
– Read the operating instructions for information on this.
SITRANS P320/P420
Compact Operating Instructions, 09/2021, A5E38874562-AD
1
7