Troubleshooting - Electrolux EVK8E00V User Manual

Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
You cannot activate or operate the
oven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display shows an error code
that is not in this table.
Steam and condensation settle on
the food and in the cavity of the
oven.
The appliance is activated and does
not heat up. The fan does not oper‐
ate. The display shows "Demo".
13.2 Service data
If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
Possible cause
The oven is not connected to an
electrical supply or it is connected
incorrectly.
The oven is turned off.
The clock is not set.
The necessary settings are not set.
The automatic switch-off is on.
The Child Lock is on.
The fuse is blown.
The lamp is defective.
There is an electrical fault.
You left the dish in the oven for too
long.
The demo mode is activated.
Remedy
Check if the oven is correctly con‐
nected to the electrical supply (refer
to the connection diagram if availa‐
ble).
Turn on the oven.
Set the clock.
Make sure that the settings are cor‐
rect.
Refer to "Automatic switch-off".
Refer to "Using the Child Lock".
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Replace the lamp.
• Turn off the oven with the house
fuse or the safety switch in the
fuse box and turn it on again.
• If the display shows the error
code again, contact the Custom‐
er Care Department.
Do not leave the dishes in the oven
for longer than 15 - 20 minutes after
the cooking process ends.
Refer to "Daily Use chapter, Basic
Settings.
ENGLISH 21