Audible Signals - Simons Voss Technologies PegaSys Wall reader stainless steel/pin code 2.1 Quick Start Manual

10. Signalling of the PinCode field
Number of flashes
3 ×
4 ×
5 ×
6 ×
7 ×
8 ×

10.2 Audible signals

Feedback signals
2× beeps (tone change from low
to high) with green LED
2× beeps (tone change from high
to low) with green LED
6× beeps with red LED
Red LED every 2 seconds
30 / 64
PegaSys Wall reader stainless steel/
Meaning
The memory is full; no
further codes can be
programmed.
The programming
code cannot be de-
leted, only changed.
The programming
code entered does not
match the first code
that was entered.
The code entered
does not exist or is
blocked.
The code to be de-
leted does not exist.
The code entered
already exists.
Meaning
Additional code successfully pro-
grammed.
Code successfully deleted.
Low battery.
Battery empty; entries will no
longer be accepted.
pin code 2.1/4.1
Sequence
Input is completed.
Input is completed.
The error is detected
and input is ended.
The error is detected
and input is ended.
Programming mode
proceeds.
Programming mode
proceeds.
EN