Maintenance; Reset On Stainless Steel Reader (Up To Firmware 4.X) - Simons Voss Technologies PegaSys Wall reader stainless steel/pin code 2.1 Quick Start Manual

Table of Contents

Advertisement

Available languages

Available languages

PegaSys Wall reader stainless steel/
pin code 2.1/4.1

6 Maintenance

7 Reset on stainless steel reader
EN
7. Close the reader completely and lock it.
8
8. Connect the power supply.
9
9. Reset the reader to delete any stored data.
10. For wall reader 2.1 stainless steel: Read in the facil-
ity card and the door INIT card one after the other.
11. For LEGIC wall reader 2.1 stainless steel: Read in the
SAM63 card to christen the reader.
12. For wall reader 2.1 stainless steel: Check the func-
tion with an authorised RFID identification medium.
Wall reader 2.1 stainless steel/PinCode ready for
9
operation.
The device itself is maintenance-free.
NOTE
Maintenance of electric strikes
Different electric strikes require different maintenance
measures.
Maintain electric strikes in accordance with the
manufacturer's specifications.
(up to firmware 4.x)
10
1. Disconnect the power supply.
6. Maintenance
27 / 64

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PegaSys Wall reader stainless steel/pin code 2.1 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Pegasys wall reader stainless steel/pin code 4.1

Table of Contents