NSI Tork WFTU40 - Wi-Fi Time Switch Programming Instructions

Introduction

NOTES:
You must have internet for this device to work outside the range of the router
You must have a router for this device to work with your phone app

• See your routers manual if this needs to be changed

1. Make sure router is connected to the internet and working properly
2. Make sure phone or tablet you plan to use for Smart devices is connected to your Wi-Fi router
3. Download the TORK app on your phone or IPad.
4. Register your TORK app
   • Enter country from drop down menu in 1st space
   • Type in known email account in 2nd space
     • This will be your App username
   • Press and release Next
   • Type in known password
     • This will be your App password
5. Plug Smart device needing connection into outlet closest to router
   • This will help ensure successful setup connection
   • You can relocate Smart device at needed location after setup is successful
6. Push and hold On/Off button on Smart device for 30 seconds to ensure device is reset
   • LED light on Smart device will blink rapidly if reset is successful
7. Press and release Add Device on screen
8. Press and release Electrical Outlet on screen
9. Confirm indicator on Smart device is blinking On/Off red light rapidly
   • If not, push and hold On/Off button on smart device for 30 seconds to reset
10. Press and release Confirm indicator rapidly blink on screen
11. Enter router password
    • This may already be entered
12. Press and release Confirm on screen
    • The Connection Now screen will show your connection progress
    • If setup connection is successful you will see Successfully Added 1 Device and Smart device will stop blinking
    • If setup is not successful repeats steps 1 thru 4 & 7 thru 12.
13. Press and release "Done" on screen
14. Press and release large Button in middle of screen to test connection
    • Smart device should cycle On & Off
15. Remove and relocate Smart device to desired outlet location
    • Once Smart device is plugged into outlet red light should blink momentarily
    • Smart device red light will stop blinking once router connection is reestablished
16. Retest connection by pressing and releasing large button in middle of screen
17. Press and release Back at top left of screen
    • You are now located at the control screen
18. Push and release "+" sign located at top right of control screen
19. Repeat steps 5 thru 17

Connecting Smart Device to (Alexa) Echo Dot

Open Amazon Alexa App
Choose top left menu from home page of Alexa App
Choose Skills from menu
Type in "Smart Life" in search box located at top of screen and choose search Choose Smart Life Skill in menu
Choose Enable
Enter email address and password used in TORK app
Choose Link Now
Choose Authorize
Choose done in upper left hand corner
Choose top left menu from home page of Alexa App
Choose smart home from menu
Choose plus sign + above Add Device

• Alexa will discover all devices in set up in TORK network
• Each smart device will use the TORK network default name

Testing Alexa (Echo Dot) Voice Commands

From the smart home screen on your Alexa App identify the name of the smart devices i.e. SmartHome
Ask Alexa to turn on SmartHome smart device by saying "Alexa, turn on SmartHome".
Alexa will turn on the Smart Device and respond with OK.
Ask Alexa to turn off SmartHome smart device by saying "Alexa, turn off SmartHome".
Alexa will turn off the Smart Device and respond with OK.

Connecting Smart Device to Google Home

Open Google Home App
Choose top left menu from home page of Google Home
Choose Home Control from menu
Push plus sign + at bottom right hand corner
Scroll through list and locate Smart Life
Choose Smart Life
Enter email address and password used in TORK app
Choose Link Now
Choose authorize
Choose done
Test by asking Google "Hey google, turn on everything"

RISK OF ELECTRIC SHOCK
Disconnect power at main panel prior to installing or servicing this lighting control or the equipment connected to it.

Videos

TORK: Smart WiFi Product App Setup Guide Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download NSI Tork WFTU40 - Wi-Fi Time Switch Programming Instructions